Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1812003.png)
4. Take out the rubber gasket -C- from the tank.
5. Pull hose off the high-pressure pump.
Installing pump for headlight washer system
1. Apply a suitable rubber lubricant (tyre mounting paste) to sealing surface -Arrows A- and press rubber seal into tank -Arrow B-until it is felt to
engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -Arrows A- and attach the high-pressure hose to the pump -Arrow B-.
3. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -Arrows A-.
