Cayenne (9PA) V6-3.2L (2006)
3. Tighten the top three fastening screws -arrows C-. Tightening torque: 1 ftlb.
4. Connect rapid-action coupling for water line to lifting cylinder -arrow D-.
5. Press out nozzle head from the inside -arrow A- and retain it.
6. Fit cover -arrows B-.
Subsequent work
1. Install front apron.
2. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a
left or right spray nozzle, or whether the water reservoir for the headlight washer was completely emptied or not, the bleeding process can require