porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Campaign - Windshield Wiper Arm Replacement
Page 2
background image

See Attachment "C"

Attachment "A" VIN List

For complete VIN List, please consult e-DCS Document Repository/Service Actions.

Or, use the VIN range previously shown as a general guideline. The VIN can be checked in the Porsche e-DCS/WWS for confirmation of an open recall
campaign. Attachment "A" for W603 VINs is an electronic attachment only, and will be accessible via e-DCS Document repository. This attachment will
not be available in a printed form and therefore cannot be sent to your dealership location Also, the VIN can be checked via the VRU (Voice Response
System) for any open listing.

Attachment "B" Work Procedure: Replacing both front wiper arms.

1.

Remove the two front wiper arms according to > Workshop Manual '922519' Removing and installing wiper arm section on "Removing" and take
both wiper blades off the wiper arms according to > Workshop Manual '922719' Removing and installing wiper blade section on "Removing".

2.

Follow the instructions provided in > Workshop Manual '922719' Removing and installing wiper blade - section on "Installing" to install the
removed wiper blades onto the new wiper arms. Install the new front wiper arms according to > Workshop Manual '922519' Removing and
installing wiper arm - section on "Installing"'.

Note!

Do not enter the Workshop Campaign in the Warranty and Maintenance booklet.

Attachment "C" Administrative Procedure, Workshop Campaign W603

Warranty claims should be submitted via e-DCS

Note:

Always check for open recall status under the appropriate e-DCS menu options.

Affected VINs: 
See Attachment "A"

Labor Operation: Will be automatically inserted when the damage code is entered.

Time Allowance

Parts Information

References

Disclaimer

All Technical Service Bulletins: > < Campaign - Windshield Wiper Arm Replacement