porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Campaign - Wiper Blade Replacement|Page 10226 > < Removing and Installing Wiper Arm|Page 10217
Page 1
background image

Wiper Blade: All Technical Service Bulletins
Campaign - Wiper Blade Replacement

Cayenne
21/05 
Binder - 9, Electrical

November 1, 2005

W605 - Replacing Windshield Wiper Blades (Workshop Campaign)

Vehicle Type: 
Cayenne/Cayenne S/Cayenne Turbo

Model Year: 
2006 (6)

Concern: 
Replacing windshield wiperblades.

Information: 
This is to inform you of a voluntary Workshop Campaign on a certain 2006 model year Cayenne (V6), Cayenne S and Cayenne Turbo vehicles. Vehicles
which had the wiper blades replaced more than 4 weeks ago as part of the sales check, environmental influences can:

-

reduce the wiping quality of the wiper blades, causing the wiper blades to smear.

-

cause the wiper blades to produce rubbing noises.

On all model year 2006 vehicles supplied to customers in the months of November 2005 and December 2005, before handing the vehicle over to the
customer, check whether the sales check was performed more than 4 weeks ago and if yes, replace both front windshield wiper blades.

Affected vehicles: 
A total of 665 U.S. and Canadian vehicles fall within the scope of this Workshop Campaign.

Very Important!

Use the VIN range below as a general guideline. The VIN can be checked in the Porsche e-DCS/WWS for confirmation of an open recall campaign.
Refer to Attachment "A" to determine if a particular vehicle is eligible for this recall campaign (or Workshop Campaign). Also, the VIN can be
checked via the VRU (Voice Response System) for any open listing.

Not every vehicle in the below listed range may be affected. Use the ranges below as a general guideline. Alternatively, the VIN can be checked in
the Porsche e-DCS/WWS for confirmation of an open service action.

The affected Vehicle Identification Numbers are contained in the VIN Ranges shown.

Work Procedure: See Attachment "B"

Time Allowance

Campaign - Wiper Blade Replacement|Page 10226 > < Removing and Installing Wiper Arm|Page 10217