Cayenne (9PA) V6-3.2L (2006)
3. Unscrew fastening nut -2-.
4. Pivot wiper arm -3- up and down a little and remove.
5. Unscrew fastening nut -4-.
6. Unplug the electrical connection and unscrew the three fastening screws -5-. Remove the wiper motor.
Installing wiper motor for rear window wiper system
NOTE:
-
The rear window wiper motor must not be installed until the rear window module and lock have been installed and adjusted. This also applies
when the rear window module has been removed and re-installed.
-
Ensure the spring-loaded pin engages in the drive disc.
1. Connect the electrical plug to the wiper motor and let the motor run fully once.
2. Mount rear window wiper motor on studs of wiper motor reinforcement (bodyshell).