porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Disassembling and Assembling Pistons|Page 1176 > < Disassembling and Assembling Pistons|Page 1174
Page 8
background image

Piston inserted in piston funnel

Piston with restraining strap

5. Place the piston onto the cylinder from above and slide it into the cylinder using the handle of a hammer if necessary. When doing so, make sure

that the direction of travel arrow is pointing forwards -see arrow (Figure shows cylinder 1)-. If you are using the funnel 9784/1, position it flush on
the crankcase -3-. Check the position of the combustion chamber recess -1- and the direction of travel arrow when doing this.

Installing pistons

Disassembling and Assembling Pistons|Page 1176 > < Disassembling and Assembling Pistons|Page 1174