Cayenne GTS (9PA) V8-4.8L (2008)
Repairs and Inspections Required After a Collision: Service and Repair
Component Exchange After Airbag Triggering
Component exchange after airbag triggering
The following components must be removed and replaced after the airbag system is triggered:
After triggering of the airbag unit on the drivers side:
-
Contact unit
-
Airbag unit, driver's side
After triggering of the airbag unit on the passengers side:
-
Airbag unit, passenger's side
-
Triggering unit after the third time the airbag is triggered
-
Instrument panel
After triggering of the side airbag unit:
-
Side airbag unit
-
Sensor for the side airbag unit after the third time the side airbag is triggered
-
Deformed or damaged components on the seat
After triggering the seat-belt tensioner
After triggering of the belt tensioner, driver's, passenger's and/or rear unit.
After triggering one or more airbag units ( driver's, passenger's head and/or side airbag)
-
All belt tensioner units.
Note:
Because it is difficult to visually determine if one or more belt tensioners has been triggered, check the following points:
-
Using the PIWIS Tester 9718, read out the fault memory.
-
Check plug connection on the belt tensioner for damage.
-
Pull out the belt strap as far as possible and check for wear.
-
Perform a function test on the automatic belt device.