Cayenne S (9PA) V8-4.5L (2003)
4.1.9 Insert relay on left of rear CM to the underside of the holder.
4.2
Exterior electrical wiring harness.
4.2.1 Feed 10-pole connector through the empty hole (area of rear left wheel well; inset in Figure 013) into the passenger compartment from outside.
4.2.2 Establish plug connection to interior electrical wiring harness and attach grommet.
4.2.3 Push 1 x cable clip onto the upper welded pin of the vehicle.
4.2A Secure electrical wires to the lower mount in positions A-D using further clips.
4.2.5 Establishing electrical plug connections:
-
3-pole connector -> limit switch;
-
2-pole connector -> handle button.