Cayenne S (9PA) V8-4.5L (2003)
8. Mount and tighten the 3 coolant hoses.
9. Install engine compartment cover on the right side. To do this, tighten the 4 bayonet screws and the sheetmetal screw on the windshield washer
reservoir.
10. Connect electric plug to expansion tank.
11. Fill and bleed the cooling circuit.
12. Screw on lid of expansion tank clockwise.
13. Close the maintenance cover.
14. Reinstall the complete engine guard.
15. Conduct a test drive with the vehicle, check the fluid level in the expansion tank after the coolant circuit has cooled again and, if necessary, fill up
to the maximum marking with coolant.