Cayenne S (9PA) V8-4.5L (2003)
2. Tighten the 8 fastening screws with 10 Nm (7.5 ft. lbs.). Mount the sheetmetal holder for the cable duct using the 2 upper fastening screws.
3. Fit the pulley on the coolant pump. Screw in the 3 fastening screws by hand.
4. Mount the drive belt. To do this, turn the belt tensioner clockwise and thread the drive belt around all the pulleys. Then carefully relieve the
tensioning roller.
5. Check whether the drive belt is correctly installed.
6. Tighten the 3 fastening screws to 23 Nm (17 ft. lbs.).