Cayenne S (9PA) V8-4.5L (2003)
3. Attach the carrier to the contact housing "e" "arrow A" until the locking tabs engage audibly "arrows B".
4. Insert the carrier with the contact housing "e" into the socket.
5. Position the rubber sleeve "c" on the socket.
6. Position the socket with the rubber sleeve in installation position, then open up the socket "arrow C" and secure to the holder with the fastening
screws "1".
7. Push the lead inwards "arrow" and press the rubber sleeve "a" in until it engages audibly.
8. Tighten tie-wraps "b".
9. Press in plug "arrow A" until locking tab "B" is felt to engage.