Cayenne S (9PA) V8-4.5L (2003)
2. Place the tool on the primary locking and lift the locking.
-
"A" Optical contact, grey
-
"B" Optical contact, black
3. Pull LWL, e.g., "B" carefully in the "direction of the arrow". If it is not possible to pull out the LWL, check again if the secondary locking is
completely released and if the primary locking is raised sufficiently.
Visual inspection of lockings, connector housing, and contacts for possible damage and if necessary, exchange the damaged parts.
Installing optical contacts on connector side
-
Remove the dust boot right before plugging.
-
Check the proper condition of the contact.
1. Insert the optical contact "B" in the connector until it engages audibly.
-
"A" Optical contact, grey
-
"B" Optical contact, black
2. Lock the secondary locking "arrow" and check the optical contacts for tightness.
Removing and installing optical contacts on socket side