Cayenne S (9PA) V8-4.5L (2003)
13. Unscrew the 4 fastening screws on the design cover.
14. Remove design cover from the cylinder bank 1 - 4. Lift the cover slightly with both hands on the side pointing towards the intake system until it
snaps out of the mounting bosses.
15. Lift the cover on the front edge and slide the ignition coil cover of the second cylinder out of the torque support bracket. Then pull off the cover to
the front.
16. Remove engine compartment cover on the right side. To do this unscrew the 4 bayonet screws and the fastening screw on the windshield washer
reservoir.
17. Unscrew the torque support. To do this unscrew the fastening screw on the torque support bracket and pull it out.