Cayenne S (9PA) V8-4.8L (2010)
INFORMATION: Before unscrewing the fastening screws on the bumper, a suitable piece of wood must be inserted underneath between
the radiator and transverse bar to prevent the radiator from falling down.
5. Remove bumper.
5.1. Unscrew fastening screws -9, 10- ( -arrows- ).
5.2. Remove bumper -11- ( -arrow- ).
Installing front bumper
1. Install bumper.
1.1. Install bumper -11- and position it correctly -arrow-.
1.2. Screw in fastening screws -9, 10- ( -arrows- ) but do not tighten them and check the position of the bumper.
1.3. Tighten fastening screws -9, 10- to the specified tightening torque. Tightening torque: 1.5 Nm (1.0 ftlb.) ± 0.5 Nm (±0.5 ftlb.), Tightening
torque: 65 Nm (48 ftlb.) ± 10 Nm (±7.5 ftlb.)