Cayenne S (9PA) V8-4.8L (2010)
3. Pull out mountings for ParkAssist sensors -4- ( -Arrow C- ).
INFORMATION: Do not loosen retaining clips by positioning the screwdriver between the retaining clips and fastening ribs of the cover. Do
not damage cover's fastening ribs.
Remove cover:
4. Push retaining clips -6- on the inside at the areas indicated ( -circle markings- ) as far as possible to one side ( -Arrow D- ). Open up the retaining
clips -6- using a screwdriver and remove them.
5. Remove cover -5- ( -Arrow E- ).
6. Unscrew fastening screw -7-.