Cayenne S (9PA) V8-4.8L (2010)
Installing rear bumper
1. Fit rivet nuts
only when replacing the bumper on vehicles with external spare wheel
1.1. Insert rivet nuts in the bores and rivet with hand-held blind rivet nut device NR.125.
2. Installing rear bumper
2.1. Replace seal -3- (or -3- ).
2.2. Position rear bumper -1-.
2.3. Screw in fastening screws -2- (or -2- ). Tightening torque: 111 ftlb. + 22 ftlb..