Cayenne S (9PA) V8-4.8L (2010)
2. Tighten fastening screws -1- .
-
Tightening torque: 2 Nm (1.5 ftlb.)
3. Slide cover -1- into the centre cover -2- ( -arrow A- ) and clip it in by pushing it upwards -arrow B- .
4. Position rear lifting platform holder -2- on the body -arrow- and secure with the fastening screw -1- .
-
Tightening torque: 9 Nm (6.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)