Cayenne S (9PA) V8-4.8L (2010)
/v8-4.8l/Page-113001.png)
Firewall: Service and Repair
Sealing front panel
Technical values
Preliminary work
1. Disconnect battery.
2. Lift the vehicle.
3. Remove the cardan shaft.
4. Remove primary catalytic converter.
5. Remove wiper motor.
6. Remove DME control module.
7. Remove alarm siren.
Sealing front panel
Removing support for DME control module
1. Screw down fastening nut -1- and take off ground strap with the twist lock.
2. Open the retaining clips -arrow A- and take out the DME control module wire harness -arrow B- .
