Cayenne S (9PA) V8-4.8L (2010)
/v8-4.8l/Page-113002.png)
3. Unscrew the fastening screw -2- and the two fastening nuts -3- and take out the support for the DME control module.
Removing intake pipe on the heating/fresh air unit
1. Pull out wire harness retaining clips on the intake manifold -arrow A- and unclip the wire harness on the intake manifold -arrow B- .
2. Pull out air inlet grille -arrow C- .
3. Open both retaining clips in the intake manifold -arrow D- .
4. Unscrew the two fastening nuts -1- and remove the intake manifold.
Sealing front panel
