Cayenne S (9PA) V8-4.8L (2010)
INFORMATION: To mill the required shoulder, the tool with the designation Spot facer for Time-Sert thread repair set NR.122-2 must be used.
The tool provided with the complete set supplied must not be used in this case.
Item
Tool
-1-
Time-Sert thread repair set NR.122-1
-a-
Threaded bushing
-b-
Drill
-c-
Spot facer for Time-Sert thread repair set NR.122-2
-d-
Thread cutter
-e-
Screw-in tool
Installing repair threaded bush
NOTE:
Risk of material damage due to incorrectly screwed joints on chassis parts following thread repair.
-
Threaded joints may not be secured correctly following repairs due to modified chassis mounting points on the rear axle on MY 08 vehicles.
-
The rear axle must always be secured using the -> HEXAGON-HEAD BOLT N.909.763.02 following repairs to the chassis bush.
-
Always replace fastening screws for the chassis bush following repairs.