Cayenne S (9PA) V8-4.8L (2010)
INFORMATION: The repair bush must be installed recessed. To mill the required shoulder, the tool with the designation Spot facer for Time-Sert
thread repair set NR.122-2 must be used. The tool provided with the complete set supplied must not be used in this case.
1. Drill out thread.
1.1. Drill out the old thread with a drill to the root of the thread.
2. Mill shoulder.
2.1. Mill out drill hole with spot facer -C- to dimension -X- . -> Test and adjustment value: 10 mm Milling must only be performed using tool
Spot facer for Time-Sert thread repair set NR.122-2. For milling, use an electronically controlled power drill set at a speed of approx. 250
1/min.