Cayenne S (9PA) V8-4.8L (2010)
2. Remove control unit for tyre pressure monitoring system.
2.1. Undo fastening screws -4-.
2.2. Remove control unit for tyre pressure monitoring system -5- ( -Arrow B- ) and tie to the side with connected leads.
3. Unclip wiring harness for parking brake contact switch and remove plug.
3.1. Unclip wire harness -6- on fastening clip -7- -arrow C-. Replace damaged fixing clips -7-.
3.2. Release connector -8- ( -arrow D- ) and pull it off ( -arrow E- ).
4. Loosen control unit carrier.
4.1. Unscrew nut -9-.
4.2. Push control unit carrier -10- upward -Arrow F- and pull out the support -11- on the bracket -Arrow G-.