Cayenne S (9PA) V8-4.8L (2010)
Removing and Installing Cover For Bracket
Removing And Installing Cover For Bracket
Preliminary work
Preliminary work for cover for bracket, driver's side
1. Remove trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard.
Preliminary work for cover for bracket, passenger's side
1. Remove glove compartment. Refer to Removing and installing glove compartment.
Removing cover for bracket
1. Unclip cover for bracket -1- using a plastic wedge at the retaining clips -2- and swivel it out -arrow A-.
2. Remove cover for bracket -1- to the rear -arrow B-.
Installing cover for bracket