porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Adjustment Values For Suspension Alignment|Page 446 > < Fuse Location and ID|Page 440
Page 1
background image

Alignment: Specifications
Adjustment Values For Suspension Alignment

WM 4400TW Adjustment values for suspension alignment

Notes on adjustment values for suspension alignment

See requirements for suspension alignment.

Vehicle height (steel springs)

Information:
-

The following values relate to the empty weight, i.e. full fuel tank, vehicle with tire repair kit (or spare wheel, collapsible wheel) and tools, but
without driver and without additional weights.

-

Tire pressure in accordance with specifications.

-

If the vehicle is a Cayenne with air suspension, it must be adjusted to normal level. Adjust from the low level to the normal level for the vehicle.
Only align and adjust the vehicle in this position.

-

If the control unit or one of the self-levelling sensors has been replaced, a calibration must be carried out with the Porsche System Tester.

Adjust vehicle to normal level:

Stop vehicle and apply brake.

Close vehicle doors.

Tap the right-hand rocker switch on the center console in the appropriate direction until the vehicle has reached the low level. Then adjust to the
vehicle's normal level. The middle indicator light next to the rocker switch is permanently on. If a further indicator light should come on, a different
level is set.

Vehicle height (air springs)

Information:
-

The following values relate to the empty weight, i.e. full fuel tank, vehicle with tire repair kit (or spare wheel, collapsible wheel) and tools, but
without driver and without additional weights.

-

Tire pressure in accordance with specifications.

-

If the vehicle is a Cayenne with air suspension, it must be adjusted to normal level. Adjust from the low level to the normal level for the vehicle.
Only align and adjust the vehicle in this position.

-

If the control unit or one of the self-levelling sensors has been replaced, a calibration must be carried out with the Porsche System Tester.

Adjust vehicle to normal level:

Stop vehicle and apply brake.

Close vehicle doors.

Tap the right-hand rocker switch on the center console in the appropriate direction until vehicle has reached the low level. Then adjust to the vehicle's
normal level. The middle indicator light next to the rocker switch is permanently on. If a further indicator light should come on, a different level is set.

Adjustment Values For Suspension Alignment|Page 446 > < Fuse Location and ID|Page 440