Cayenne S (9PA) V8-4.8L (2010)
Steering Column: Service and Repair
WM 481319 Removing and installing steering column trim
Removing steering column trim
1. Adjust the steering column downward and to the rear.
2. Angle the steering wheel 90° to the left, press the left locking lug forward with a screwdriver and unclip it.
3. Angle the steering wheel 90° to the right, press the right locking lug forward with a screwdriver and unclip it.
4. Pull the top steering column trim back and tip it up slightly so that the steering column trim can be removed from the front guide.
5. Use a small screwdriver to unclip the retaining strip for the gap cover (leather) -arrows-. Remove the top steering column trim.
6. Remove the steering column adjusting lever.
7. Remove the two fastening screws from the lower steering column trim at the left and right next to the steering column.