Cayenne Titanium (9PA) V8-4.5L (2006)
5. Pull out wire harness -5- and grommet -4- from spare wheel mount (-arrow A-), until plug connection -6- is accessible.
6. Release plug connection -6- and disconnect it (-arrow B-).
7. Secure wire harness -5- to spare wheel mount using an adhesive strip.
8. Unscrew fastening screws -7- and remove momentary-switch handle -8-. -> Tightening torque: 2 ftlb.
9. Unclip cover for momentary-switch handle -9- and remove it.
Installing momentary-switch handle