Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1792001.png)
Spare Tire Carrier: Service and Repair
Removing and Installing Pneumatic Spring For Bearing For Spare Wheel Mount
Removing and installing pneumatic spring for bearing for spare wheel mount
Removing pneumatic spring
1. Remove rear apron.
2. Unscrew fastening screw -2-.
3. Pull off cover -3- on lower bearing, guiding the wire harness -4- inward.
4. Push down safety clip -5- from the pneumatic spring -6- (-arrow A-).
