Cayenne Titanium (9PA) V8-4.5L (2006)
Separating carpet at combination sensor
First push on the combination sensor connector firmly (makes removal easier!). -arrow-. Lift connector lock and then remove connector!
Pulling off plug of combination sensor
Replace combination sensor. -> Tightening torque: 8 Nm (6 ftlb.)±1 Nm (±0.5 ftlb.)
Subsequent work
1. Install triggering unit for airbag.
2. Install center console cover.
3. Connect the battery.
Information:
After installation or replacement of combination sensor, calibrate vehicle.
^
Calibration must only be performed with the vehicle standing horizontally with the brakes off.
4. Calibrate combination sensor. To do this connect the Piwis tester: Select >>Vehicle Cayenne >>System PSM>>Actual values menu >>Security
code (at end of list). Note the security code. Quit>> Actual values menu.
5. Select>> Calibration menu>> Enter security code. Calibrate>> Lateral acceleration sensor and Axial acceleration sensor in sequence using the
menu.