Cayenne Titanium (9PA) V8-4.5L (2006)
1. Position arm bracket 96790 in the pulley and turn it until it locks.
ATTENTION Material damage!
^
If the tool slips or if the tool is faulty, the wings or the cooling fan can be damaged as a result of excessive forces!
^
Only use an appropriately strong tool (e.g. 3/4 inch)
^
Ensuring that the tool is seated correctly
^
Never use the special wrench socket wrench insert 9714, for loosening or tightening
^
Working with a second worker
2. Position a large torque wrench and loosen the central screw. Do not use the screw again.
3. Remove the central screw and pull the pulley down and forward.
Installing crankshaft belt pulley