Cayenne Titanium (9PA) V8-4.5L (2006)
Note: It is best to use a tool that has an addendum of less than 50 mm -A- (see special tool) to tighten the rear fastening screw on the cylinder
head cover close to the plenum panel.
6. Position all fastening screws and tighten them in accordance with the correct tightening sequence Tightening torque: 13 (9.5 ft-lb.) Nm-see figures
for both cylinder rows-. Screws -18 and 19 cylinder rows 1 to 4- are inserted later with the torque support bracket.