Cayenne Titanium (9PA) V8-4.5L (2006)
Wire harness holder
9. Connect the cable plug for the hydraulic valve and fit the cap.
Cable plug
10. Attach plug connection for positive crankcase ventilation to the flange on the camshaft housing cover.
11. Tighten the ignition coils. - Tightening torque: 10 Nm (7.5 ftlb.).
12. Connect ignition coil. To do this, push on the connector until it locks with an audible click.
Ignition coil
13. Install bracket for torque support. Tighten the M8 x 45 Torx screws at the top screw points. - Tightening torque: 23 Nm (17 ftlb.) Tighten the M6
x 40 screws at the bottom screw fastening points (middle of valve cover). - Tightening torque: 13 Nm (9.5 ftlb.)