Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-457005.png)
they will go in the assembly tool. The retaining springs are free -2-.
Valve keys in assembly tool
9. Secure the valve keys by pushing up the ring. Check that the valve keys are aligned correctly -1-.
Valve keys in assembly tool
10. Insert valve key assembly tool in tool setup and position in front of the valve stem.
Valve key assembly
11. When assembling the valve keys, ensure that the assembly tool is inserted at the valve stem end -2- and is then pushed down (the tool remains
secured when this is done -1- ). The valve keys click audibly into the valve grooves when the valve key assembly tool is pressed onto the valve.
Check valve keys to ensure that they are installed correctly.
