Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-477008.png)
Caution:
Danger of injury!
When pulling the bracket off, even greater amounts of engine oil can leak out.
If the bracket is stuck, it can loosen abruptly. If this happens, your fingers could be injured.
-
Proceed carefully when pulling out the bracket.
-
Collect escaping fluids.
4. Pull off the bracket from the engine in a forward direction. If the bracket is stuck very firmly, lever it off very carefully using a suitable implement.
Installing Bracket For Oil-Water Heat Exchanger
WM 176723 Installing bracket for oil-water heat exchanger
Information
Component overview
Information:
The illustrations apply to the Cayenne Turbo (M48/50).
Overview of V8 engine
