Cayenne Titanium (9PA) V8-4.5L (2006)
4. Remove the filter element. Remove the filter downwards and dispose of in accordance with legal requirements.
Information:
Do not remove the O-ring with a sharp object.
The oil filter housing contains a cutout via which the O-ring can be removed.
5. Clean the oil filter housing and replace the O-ring seal. Clean the oil filter housing thoroughly inside and outside and replace the O-ring. Carefully
lever off the O-ring. The oil filter housing must not be damaged during this procedure.
Oil-filter housing sealing ring
6. Install the filter element.
Information:
Lightly oil the O-ring when installing the oil filter housing.
7. Install the oil filter housing and tighten using special tool oil filter spanner 9204. - Tightening torque: 19 ftlb. Lightly oil the O-ring when doing
this.
8. Fit engine guard.
9. Fill engine oil, start engine and check oil level.