Cayenne Titanium (9PA) V8-4.5L (2006)
Removing camshaft timing gear.
ATTENTION Damage to engine by turning crankshaft against the rotation direction of the engine (engine assembled)!
^
Never rotate crankshaft against the operating direction if the timing drive mechanism is mounted (timing chain jumps over).
^
Proceed carefully while working as otherwise the engine can be damaged.
^
Always turn the engine on the crankshaft and never on the camshaft as the timing chain may jump over.
^
After working on the camshaft wheels, the timing must be set.
^
Please observe the general warning notes and working regulations
1. Using socket 9714, turn the crankshaft until cylinder 1 is located at ignition TDC.