Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-537006.png)
10. Connect ignition coil. To do this, push on the connector until it locks with an audible click.
11. Push lower hose onto secondary air pump 5 - 8.
Installing design cover
Installing design cover of cylinder bank 5 - 8
INFORMATION: Place a cloth between secondary air pump and design cover to avoid scratching the cover.
1. Slide the design cover under the secondary air pump as illustrated.
2. Then press in the two rubber mountings on the bracket. The rubber mounts must be felt to engage.
3. Tighten the four fastening screws on the ignition coils. - Tightening torque: 3.5 ftlb.
Installing design cover of cylinder bank 1 - 4
INFORMATION: Place a cloth between secondary air pump bracket and design cover to avoid scratching the cover.
