Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-570008.png)
7. Re-install cardan shaft between front-wheel drive and transfer box. Make sure that the main catalytic converter is also positioned with the cardan
shaft over the transmission support.
8. Tighten screws of the catalytic converters to the body and cross member with tightening torque. - Tightening torque: 17 ftlb.
9. Fit exhaust clamps.
10. Install transverse strut. Tighten the screws -arrows- (do not forget the centre screw). - Tightening torque: 7.5 ftlb.
Installing (main) catalytic converter, cylinder bank 5 - 8
1. Push new exhaust clamp onto exhaust pipe.
2. Ensure sealing faces of exhaust system are clean.
3. Replace flange gasket and push over the studs of the main catalytic converter.
