Cayenne Titanium (9PA) V8-4.5L (2006)
Auxiliary Cabin Heater Transmitter: Service and Repair
Remote Control For Auxiliary Heater
Tools
Teaching remote control
INFORMATION:
-
The remote control for the auxiliary heater can only be taught using the Porsche System Tester.
-
A maximum of 3 remote controls can be taught per vehicle.
-
Switching from Heating to Fan can only be set on the control module. The pre-set mode is started by actuating the remote control.
1. PIWIS Tester 9718 must be connected to the vehicle, then start the System Tester. Switch on ignition. Press >> to continue.
2. Select the vehicle type.
3. Select the auxiliary heating control unit and press >>.
4. Select Teach remote control menu, press >> and follow the instructions on the System Tester.
5. After the SEND message appears, press the OFF button -3- on the remote control within 5 seconds until the saved message appears. The remote
control is now taught.
6. To teach other remote controls, repeat the process.
7. Carry out a function test on the remote control and then read out the fault memory.
8. PIWIS Tester 9718 must now be disconnected from the vehicle.