Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1458007.png)
3. Attach the refrigerant lines in the engine compartment to the connections (do not tilt) and screw down using the fastening screws -1-. - Tightening
torque: 9 ftlb.
4. Screw down the fastening nuts to the fastening clamps of both refrigerant lines. - Tightening torque: 6 ftlb.
5. Carefully place refrigerant lines onto expansion valve and press into place (do not tilt) and screw down using the two fastening screws. -
Tightening torque: 9 ftlb.
6. Push electrical plug onto pressure switch until it clicks into place.
Installing the (B - C) line on the condenser - evaporator
INFORMATION:
