porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Receiver Dryer|Service and Repair|Page 6752 > < Receiver Dryer|Service and Repair
Page 2
background image

2. Unscrew rubber grommet on condenser -arrow A- and remove upwards -arrow B-.

3. -A- Using a slide hammer kit NR.168, push plug down and turn Seeger ring until accessible from air filter.
4. Using Seeger ring pliers NR.70 remove Seeger ring -B-.

5. Screw hexagonal screw into plug and pull plug out in upward direction using slide hammer set NR.168.

6. Lift dryer out in upward direction.

Installing desiccator

INFORMATION:

Receiver Dryer|Service and Repair|Page 6752 > < Receiver Dryer|Service and Repair