porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Brake Lamp|Service and Repair|Page 9062 > < Tire Pressure Sensor|Service and Repair|Page 9057
Page 1
background image

Brake Lamp: Service and Repair

Removing And Installing Tail Light

Removing tail light

ATTENTION:

Risk of short circuit.

-

Before removing tail lights, remove ignition key and switch off light.

1. Open rear lid.
2. Remove the two caps -1- with a screwdriver or similar tool.

3. Unscrew the two fastening screws -2-.
4. Pull out light unit sideways in -direction of arrow- and also in area of ball head -3-.

5. Press detent on plug connection -4- and pull connector apart.

Brake Lamp|Service and Repair|Page 9062 > < Tire Pressure Sensor|Service and Repair|Page 9057