Cayenne Titanium (9PA) V8-4.5L (2006)
Generator pulley
8. Gather the belt section between the deflection roller of cylinder bank 1 - 4 and the crankshaft pulley to form a loop and guide it upwards to the
tensioning roller -8-. Use a wrench (a/f 30) to turn the tensioning roller -8- in a clockwise direction at the hexagon and put on the drive belt.
Slowly relieve the tensioning roller.
Tensioning roller
Fitting the drive belt
9. Check that the drive belt is positioned correctly on the pulleys.
Removing drive belt - Cayenne Turbo
Removing drive belt - Cayenne Turbo
1. Disconnect the positive crankcase ventilation line -1- and the control line -2- of the bypass valves at the disconnection points under the left
deflection roller.