Cayenne Titanium (9PA) V8-4.5L (2006)
Warning:
Hot fluid
^
Danger of scalding
-> Let the fluid cool down.
-> Wear personal protective gear.
Warning:
Hot fluid
^
Danger of scalding
-> Let the fluid cool down.
-> Wear personal protective gear.
Information:
^
Note the test conditions for the following steps.
Information:
^
Undo oil inspection plug only when temperature reaches 40°C.
4. Unscrew oil inspection plug -A-.
Oil inspection plug and oil drain plug
5. Fill with ATF using material 00000 until oil emerges at the lifting pipe.
6. Screw in oil inspection plug -A-. -> Tightening torque: 70 Nm (52 ftlb.)
Oil inspection plug and oil drain plug
7. Move selector lever to position P and switch off engine.
8. Install cover of ATF pan. To do this, tighten the two fastening screws. -> Tightening torque: 10 Nm (7.5 ftlb.)