Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-336010.png)
5. Position the pressure damper of the compressor - evaporator line and the condenser - evaporator line.
6. Place the three fastening clamps onto the threaded pins and screw down using the three fastening nuts -3-. - Tightening torque: 6 ftlb.
7. Plug in the refrigerant line from the compressor on the pressure damper (do not tilt) and screw down with the fastening screw -1-. - Tightening
torque: 9 ftlb.
8. Engage the refrigerant lines in the holder on the wheel arch, close them, and screw down using the fastening screw -2-. - Tightening torque: 1 ftlb.
9. Engage mount on the refrigerant line.
10. Insert refrigerant line -B- into the condenser and screw it in using the fastening screw on the condenser. - Tightening torque: 9 ftlb.
Installing the (C - D) line on the compressor - evaporator
INFORMATION:
-
Always replace the sealing rings of the refrigerant lines.
-
Spray the sealing rings with refrigerant oil before fitting.
