porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cut-Off Relay|Page 5561 > < Removing and Installing Cut-Off Relay
Page 2
background image

1. Move front left seat back and up as far as possible. Move backrest fully forward.
2. Detach front seat trim -arrow A- towards the front.
3. Fold the carpet cut-outs forward and remove the two fastening screws -arrows 1-.
4. Fold the seat back as far as possible -arrow B-. With the seat in its folded position, move the seat forward again using the fore-and-aft adjustment

-arrow C-.

5. Fold up carpeting -arrow- and unscrew fastening nuts -arrow 2-from battery ground strap on the body.

6. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.

NOTE:  Only for vehicles with auxiliary battery.

7. Release the cover -arrows A- and open -arrow B-.

Removing and Installing Cut-Off Relay|Page 5561 > < Removing and Installing Cut-Off Relay