Cayenne Titanium (9PA) V8-4.5L (2006)
Removing pulse sender (crankshaft reference mark sender)
INFORMATION: The installation position and cable routing for the crankshaft pulse sender is identical for both manual and automatic
transmissions.
1. Loosen cable for crankshaft pulse sender out of the clips and release cable. Use a long screwdriver to do this if necessary.
2. Remove fastening screw on crankshaft pulse sender and pull crankshaft pulse sender out carefully.
Installing pulse sender (crankshaft reference mark sender)
1. Move crankshaft pulse sender into installation position and insert screw.