Cayenne Titanium (9PA) V8-4.5L (2006)
Removing oxygen sensors in front of catalytic converter - Cayenne S (M48/00)
CAUTION:
The oxygen sensor cable can be damaged if twisted.
-
Change in emissions.
-
Check Engine light comes on.
-
Always release oxygen sensor cable so that the wire can turn when unscrewing or screwing in the sensor.
-
Do not kink cable.
1. Remove the oxygen sensor in the exhaust manifold using a mirror. To do this, screw out the oxygen sensor with an open-ended wrench SW 22.
Installing oxygen sensors in front of catalytic converter - Cayenne S (M48/00)
CAUTION:
The oxygen sensor cable can be damaged if twisted.
-
Change in emissions.
-
Check Engine light comes on.
-
Always expose oxygen sensor cable so that the wire can turn when unscrewing or screwing in the sensor.
-
Do not kink cable.