Cayenne Titanium (9PA) V8-4.5L (2006)
exhaust clamps must not be reused.
3. Release the catalytic converter mounts from the body and cross member (two screws each).
4. Remove cardan shaft between front-wheel drive and transfer box -see figure-.
5. Support transmission with transmission jack. Let main catalytic converter hang down. Unscrew the three nuts connecting the primary and main
catalytic converters. Remove main catalytic converter. Remove flange gasket.
6. Re-fit transmission support using old screws so that the transmission jack can be removed from under the vehicle.
Removing (main) catalytic converter, cylinder bank 5 - 8
CAUTION: Danger of burns from hot exhaust system
-
Do not remove the exhaust system until it has cooled down.
-
Wear protective gloves.
Cayenne Turbo (M48/50)