Cayenne Titanium (9PA) V8-4.5L (2006)
2. Loosen cable plug -3-, spring band clamp on connecting line -1- and rubber holder for tank vent -2-. The plastic line for the tank vent must remain
on the tank vent.
3. Loosen the spring band clamp on the plastic line for the tank vent -1- and carefully pull off the breather hose. Turn it with a pliers if necessary.
Make sure not to kink or twist the plastic line (when refitting it).
4. Release plastic line from the sheetmetal clips -2- and carefully pull it forward under the air return line (Turbo) -3-. When doing so, make sure that
the plastic line is not kinked. Pull tank vent and plastic line to the front.
Installing tank vent
1. Carefully pull plastic line for tank vent through under the air return line (Turbo) -3-. When doing so, make sure that the plastic line is not kinked.
Fit tank vent with plastic line into the sheetmetal clips -2-.
2. Carefully push breather hose onto the plastic line for the tank vent and fit spring band clamp -1-. Make sure not to kink or twist the plastic line.