Cayenne Titanium (9PA) V8-4.5L (2006)
18. Reinstall torque support. Install the fastening screw (M10 x 85) with a new fastening nut on the bracket. - Tightening torque: 44 ftlb.
19. Tighten torque support fastening screw on the body (M10 x 70). - Tightening torque: 44 ftlb.
Replacing ignition coils of cylinder row 5-8
INFORMATION: A rag should be placed between the secondary air pump and the design cover to prevent the cover from being scratched.
1. Unscrew the 4 fastening screws on the ignition coil cover.
2. Remove design cover of cylinder bank 5-8. To do this, lift the cover slightly with both hands at the side pointing towards the intake system until it
is released from its bracket.
3. Lift the front of the design cover and remove it.